Nearshore Software Development for Danish, Norwegian and Swedish Companies
StepTo is a team of 15-20 engineers in Belgrade, Serbia, in the same time zone as Copenhagen, Oslo and Stockholm, offering staff augmentation, dedicated teams and project work.
Reviewed by Igor Gazivoda, Founder & CEO of StepTo · Updated
What Does Nearshore From Serbia Mean for a Nordic Company?
It means engineers in Belgrade who work your hours. StepTo is a team of 15-20 engineers in Belgrade, Serbia, founded in 2020, on the same clock as Denmark, Norway and Sweden. Engineers can typically start within one to two weeks of first contact; a full team usually takes two to four weeks.
Nearshore software development means hiring engineers in a nearby country who work in or near your business hours, instead of an offshore team in a distant time zone. This page is for Danish, Norwegian and Swedish buyers: the time zone, what it costs, how the work is done, and what your procurement and security teams will ask. For a general overview, see the nearshore development page, and for how nearshore compares with offshore, the nearshore vs offshore guide.
Is There a Time Difference Between Belgrade and the Nordics?
No. Belgrade, Copenhagen, Oslo and Stockholm all use Central European Time in winter and Central European Summer Time in summer, so the whole working day is shared, with no overlap to negotiate.
Stand-ups, sprint reviews and incident calls happen in your normal hours. The gap that makes offshore work slow, a day of waiting for an answer, does not exist.
timeanddate lists Denmark, Norway, Sweden and Serbia as using Central European Time (UTC+1), with summer time (UTC+2) running from the last Sunday in March to the last Sunday in October.
What Does a Serbian Nearshore Team Cost?
StepTo's rate card is $25-85 per hour by seniority (junior $25-35, mid-level $35-45, senior $50-65, lead $65-85), and StepTo prices in US dollars only. We aim at the mid to upper end for Eastern Europe, with the emphasis on engineering quality rather than the lowest rate.
Staff augmentation starts from $4,500 per developer per month, with a 3-month minimum and weekly billing. A dedicated team of three starts from $13,500 per month, billed monthly. Project work and MVPs start at $9,000. These are starting points, not a quote: the final price follows your seniority mix, stack and scope. Full terms are on the pricing page, and you can see a starting price for your own mix on Spec Your Team. We do not compare our rates with Nordic salaries here, because we have no sourced benchmark for them; the cost calculator lets you put in your own figures.
Which Engagement Model Fits a Nordic Company?
Pick staff augmentation if you have a tech lead and need individual engineers, a dedicated team if you want a unit that owns a product area, and project work if you have a defined scope.
| Model | Starting price | Fits when |
|---|---|---|
| Staff augmentation | From $4,500 per developer per month | You have a tech lead and want individual engineers inside your own team, tools and sprints. See staff augmentation |
| Dedicated team | From $13,500 per month for a team of three | You want a team that owns a product area and is steered through its own lead. See dedicated teams |
| Project work | From $9,000 | You have a defined scope, such as an MVP or a rebuild, and want it delivered end to end. See pricing |
- Start: Engineers can typically start within one to two weeks of first contact; a full team usually takes two to four weeks.
- Replacement: Free within the first 30 days.
- Minimum term and notice: 3-month minimum, then 30 days notice to scale down.
How Is the Work Done, and How Can You Check It?
Eight practices apply on every StepTo engagement, and each one is something you can check yourself in your own repository and tools.
- Every change is reviewed by a second engineer before it is merged.
- A CI pipeline runs automated tests on every pull request.
- Engineers work in your repository and your tools from day one, and you own the code at all times.
- You get a demo or a written status report every week.
- An NDA and an IP assignment are signed before any engineer starts, and all IP goes to you.
- Engineers work on company-managed laptops with disk encryption and two-factor sign-in.
- There is a written handover whenever an engineer is replaced or the engagement ends.
- A senior StepTo engineer or lead follows each engagement.
How to verify each one is on the engineering practices page. Your procurement and security teams can start from our pre-answered due diligence sheet, and the budget approval memo is a template for getting the spend approved.
What Does GDPR Mean When the Team Is in Serbia?
Serbia is not on the European Commission's list of countries with an adequacy decision, so personal data that moves from the EU or EEA to engineers in Serbia needs a transfer tool, such as standard contractual clauses, or must be kept out of the work. This is information, not legal advice.
The Commission's list of adequacy decisions did not include Serbia when we checked on 17 November 2026. Where there is no adequacy decision, the Commission's page on standard contractual clauses says such clauses can be used as a ground for data transfers from the EU to third countries. The Swedish authority IMY sets out the same options, and the Danish Datatilsynet describes standard contracts as a basis for transfer (in Danish).
Norway is not an EU member but applies the GDPR: EFTA reports that the regulation was incorporated into the EEA Agreement, so the same transfer question applies to Norwegian buyers.
What StepTo can tell you is limited to what it publishes: an NDA and an IP assignment are signed before any engineer starts, and engineers work on company-managed laptops with disk encryption and two-factor sign-in. Data processing terms are for your data protection officer and your counsel to set; raise them on the discovery call.
Frequently Asked Questions
Is Belgrade in the same time zone as Denmark, Norway and Sweden?
Yes. Serbia, Denmark, Norway and Sweden all use Central European Time in winter and Central European Summer Time in summer, and change their clocks on the same dates, so there is no time difference and a full working day is shared.
How quickly can a StepTo team start for a Nordic company?
Engineers can typically start within one to two weeks of first contact; a full team usually takes two to four weeks.
What does a nearshore team from Serbia cost?
StepTo publishes its prices in US dollars. Staff augmentation starts from $4,500 per developer per month, with a 3-month minimum and weekly billing. A dedicated team of three starts from $13,500 per month, billed monthly. Fixed-scope project work starts at $9,000. The hourly rate card is junior $25-35, mid-level $35-45, senior $50-65, lead $65-85 per hour by seniority (junior, mid-level, senior, lead).
Who owns the code?
You do. An NDA and an IP assignment are signed before any engineer starts, all IP goes to you, and engineers work in your repository and tools from day one.
What if an engineer is not the right fit?
StepTo replaces an engineer free within the first 30 days.
Should we choose staff augmentation or a dedicated team?
Choose staff augmentation if you already have a tech lead and want engineers inside your own team and sprints. Choose a dedicated team if you want a unit that owns a product area and is steered through its own lead.
What can our procurement and security teams read before a call?
StepTo publishes a sheet of pre-answered vendor due diligence questions covering the contracting entity, rates and terms, code and IP ownership and devices, and lists the questions it answers on the discovery call instead.
How Does a Nordic Company Start With StepTo?
An engagement with StepTo starts in three steps, whether you add individual engineers or a dedicated team.
Step 1
First call
A first call with StepTo about the roles, stack and seniority you need.
Step 2
First engineers in one to two weeks
Engineers can typically start within one to two weeks of first contact; a full team usually takes two to four weeks.
Step 3
Free replacement within 30 days
If an engineer is not the right fit within the first 30 days, StepTo replaces them at no extra cost.
StepTo staff augmentation starts from $4,500 per developer per month, with a 3-month minimum, weekly billing and a 30-day notice period to scale down; a dedicated team of three engineers starts from $13,500 per month, billed monthly. There is no recruitment fee; full terms are on the pricing page.
Or reach us directly
Tell us what you're building and we'll get back to you within one business day with a no-obligation assessment.
Office hours
Sent on a weekend: we reply on the next business day.
Contracting party: StepTo d.o.o. Company details are on the Imprint page.
Send us a message
StepTo's Belgrade team replies within one business day.
It starts with a 15-minute intro call. If there is a fit, a 60-minute discovery call follows. Engineers can typically start within one to two weeks of first contact; a full team usually takes two to four weeks.
